News

Industrial Lighting Led Driver are composed of Switching Power Supply, power factor correction circuits, voltage stabilizing circuits, control circuits and protection circuits. Each part plays an important role in ensuring the normal operation, safety and reliability of LED lights. The main methods for industrial lighting LED drivers to achieve energy saving and environmental protection are as follows: 1. High-efficiency conversion: The LED driver uses high-efficiency power conversion technology to convert electrical energy into the constant current or constant voltage output required by the LED to minimize energy loss. 2. Dimming control: The LED driver can adjust the light brightness through dimming control, and flexibly adjust the light intensity according to actual needs to avoid unnecessary waste of energy. 3. Energy-saving management: The LED driver has an energy-saving management function, which can perform intelligent control based on environmental brightness, time and other factors, and automatically adjust the lighting brightness to avoid unnecessary lighting for a long time. 4. Long-life design: The LED driver uses high-quality electronic components and heat dissipation design to ensure its stable operation for a long time, reduce the frequency of maintenance and replacement, and reduce resource consumption and waste generation. 5. Low-power standby mode: When there is no lighting demand, the LED driver can enter a low-power standby mode to reduce energy consumption. 6. No pollution: LED drivers do not contain harmful substances, such as mercury, etc., have no pollution to the environment, and comply with environmental protection requirements. In short, industrial lighting LED drivers achieve energy conservation and environmental protection through high-efficiency conversion, dimming control, energy-saving management, long-life design, low-power standby mode, etc., and reduce energy consumption and environmental pollution.

The 2022 Guangzhou International Lighting Exhibition was grandly opened, Fahold Brings the world's first dual-mode driver new product, which is attracted huge attention! On August 3, 2022, the 27th Guangzhou International Lighting Exhibition (GILE) and the 19th Guangzhou International Building Electrical Technology Exhibition (GEBT) were grandly opened at the China Import and Export Fair Complex , as one of the leading brands of LED smart power supply, Fahold Electronics brought a number of smart new products to the show. As an industry gathering in the post-epidemic era, especially with the poor economic performance of the industry in the first half of the year, Guangzhou International Lighting Exhibition is expected to undertake the important task of domestic LED economic recovery and further healthy development of the domestic lighting industry. On the first day of the exhibition, there were many people participating in the exhibition, and it seems their enthusiasm was not diminished. Fahold made a concentrated appearance with several series of new products, and officially released the world's first dual-mode intelligent drive power supply F1 series products at the exhibition site. Mr. Chen Hao, Deputy General Manager of Marketing of Shenzhen Fahold Electronics Co., Ltd., introduced the features, functions and operation methods of F1 series products in detail. According to Mr. Chen Hao, the F1 series products break through traditional thinking in terms of design, take the "limit method" as the design idea, take compatibility as the design goal, and adhere to the philosophy of simplicity , and have successfully developed the new types of led driver which is combine constant voltage and constant current mode in one driver. The intelligent driver power supply with integrated working modes, together with the industry's first visual offline programmer using LCD display screen, makes the secondary configuration of LED drive power supply product specifications extremely simple. (Mr. Chen Hao Introducing F1 fucntions) The power range of this series is 40-320W, and it has the characteristics of limited power constant current meter, visual offline programming, stepless customization of constant voltage and constant current working mode parameters, all-in-one dimming, 12V/0.3A auxiliary source and so on. The F1 series is developed by Fahold to Pioneer the global market. The products have strong adaptability and can be used in outdoor road lighting, industrial lighting, LED Grow lighting and landscape lighting and other application fields. Fahold insists on technological innovation as the company's biggest development engine. The breakthrough of "dual-mode driver" technology is the result of "ten years of hard working". In order to allow the audience to deeply experience the functions of F1, Fahold combined the lighting products provided by strategic partners to set up an experience area, which attracted many visitors to experience it. (R&D Manager Showing the Operation of F1 ) In addition to F1, the first products released during this exhibition include L1 series landscape lighting LED Driver, T1 series tunnel lighting driver, and R1 series non-isolated intelligent driver. If you would like to know more details of Fahold driver, please contact us directly or visit our website: www.fahold.com

When choosing lighting for a commercial space with high ceilings, UFO LED high bay lights are always the best choice as it offer bright light and are easy to install. With the smart design of UFO LED high bay light products, the design is part of the energy efficiency. Created with a fin style to help transfer thermal properties more evenly, these round high bay fixtures allow for illumination that is widespread and powerful. Fahold is always contributing to the global LED lighting industry with technological innovation. According to customers` needs, Fahold releases FD-K serie special UFO LED Drivers with CCT(changeable color temperature) function and Power Adjustable via DIP button. Customers can select different power at one unit. It supports Multiple-units dimming in parallel functions, centralized intelligent control and management functions and compatible with multiple dimming control functions (intelligent networking control, independent single lamp control, partial multi-units in parallel control, etc.) for Commercial&industrial lighting. Fahold Electronics released K1 series dual-mode adjustable industrial lighting special drive power supply 1. Overview K1 series is a new generation of industrial lighting intelligent led driver developed by Fahold, which adopts non-isolated scheme. The product design fully takes into account the diversification of product specifications in the general market and circulation market, with compatibility as the design goal, the control signal interface and programming interface are time-sharing with the double-wire system offline programming, which easily achieve the secondary definition of product specifications. At the same time, the product is DIP-swichable for power and color temperature, further enhancing the compatibility to different lamps and lanterns. 2. Innovative design 2.1 Off-line programming The secondary definition of output specification can be realized without connecting to AC power, which is simple and efficient to get Rid of the restriction on traditional work site. 2.2 Control interface time-sharing multiplexing The double-wire off-line programming technology is used to make full use of the control interface and the programming function is superimposed on the control function through the staggered utilization of the control and programming functions, thus realizing the time-sharing multiplexing of the control and programming interfaces. 2.3 Dual-mode regulation 2.3.1 Power Adjustment The power is adjustable in three steps by using a DIP-switch, with default values of 50%, 80% and 100%, which can be adjusted according to the actual demand. 2.3.2 Adjustable color temperature Combined with the concept of human centric lighting(HCL), the adjustment of three color temperatures is realized through the DIP switch to meet the needs of HCL. 2.4 Isolation of Output & Control circuits 2.5 Structure design This series of products pays attention to the innovation of industrial design, the structure is novel and compact,finned design to effectively subdue the temperature rise. The structural dimensions of the whole series of products are identical, easy to install, and can take into account a variety of fixing methods such as hanging rings and hooks. 3. Other features l Input voltage: 120-277Vac; l IP65 protection rate; l Constant current design, off-line programming; l Dual mode Dip-switchable: color temperature adjustable, power adjustable; l 0(1)-10V dimming, the dimming is delicate and smooth without flicker; l 0-10V/PWM two-in-one dimming, no afterglow when turned off (optional); l High-level protection: differential mode: 4KV, common mode: 6KV; l 12V/200mA auxiliary power optional; l Isolated Dimming signal; l Compatible with light sensor control; l Protection: short circuit protection, open circuit protection; l THD<20%. 4. Schematic 5. Model List: Model Power(W) Vout(Vdc) Iout(mA) Efficiency FD-100K-130B/C/D/E 100 90-130 1000(Max) 95.0% FD-100K-260B/C/D/E 100 180-260 500(Max) 96.0% FD-150K-130B/C/D/E 150 90-130 1500(Max) 95.0% FD-150K-260B/C/D/E 150 180-260 750(Max) 96.0% FD-200K-130B/C/D/E 200 90-130 1800(Max) 95.0% FD-200K-260B/C/D/E 200 180-260 850(Max) 96.0% FD-240K-130B/C/D/E 240 90-130 2200(Max) 95.0% FD-240K-260B/C/D/E 240 180-260 1100(Max) 96.0% Note: 1. All performance parameters are typical values measured at 25°C ambient temperature, 230Vac input, full load conditions, unless otherwise specified; 2. B means 3 in 1 dimming and current adjustable; C, means No dimming and no current adjustable type; D, means Power dip-swichable type; E, means Power&Colour temperature dip-swichable type.

LED linear light series is a high-end flexible decorative lamp, which is characterized by low power consumption, long life, high brightness, easy to bend, maintenance-free, etc. Especially suitable for indoor and outdoor entertainment venues, building outline drawing and billboard production etc. According to different needs, the product has 12V, 24V, etc., and the length is 30CM, 60CM, 90CM, 120CM. Line lights with different specifications can also be customized according to customer needs. The LED line light is the LED profile wall washer series aluminum profile lamp body. The compact and lightweight end cover and mounting bracket are made of aluminum alloy high pressure die-casting high temperature resistant silicon rubber seal ring to ensure the reliability of waterproof. The lamps can be installed individually or in combination. Suitable for various buildings, indoor or outdoor local or outline lighting. The shell of the lamp is made of aluminum alloy, with bright lines, simple structure, beautiful appearance, strong, corrosion-resistant, and easy installation. 16 million colors of static display flashing changes can be achieved through color matching: brighting and Dimming. Cross color change: Several color temperatures alternate at intervals Chasing changes: catching up with several color temperatures Flow function: a single color temperature flows regularly Linear lighting is has become increasingly popular due to its flexibility, excellent performance and aesthetic appeal. Flexibility – linear lighting can be mounted into almost any ceiling type. You can get surface mounted, suspended, recessed and grid ceiling mounted. Some linear lighting products offer a range of connecting shapes in corner L shapes or T and cross junctions. These connecting shapes combined with a range of lengths allow lighting designers to create truly unique designs with a luminaire that can be designed to fit the room. Performance – LEDs are directional, reducing the need for reflectors and diffusers that and reduce efficacy. Aesthetics – it is often not enough to have excellent performance; this needs to be matched with stunning design. However, LED Linear has a pretty strong offering in that department as linear lighting provides a massive amount of versatility for creating unique and eye-catching designs. Custom designs with corners, squares, long linear runs, direct/indirect light and custom RAL colours are just a few of the options available that make LED Linear an easy choice. Colour temperature – LED Linear lights can often offer a wide range of colour temperatures, flexible to meet the lighting environment. From warm white to cool white, different temperatures can be used to create mood and atmosphere in a space. Also, linear lighting is often available in tuneable white and RGBW colour changing light – controlled by remote control or wall control.

An LED driver's main purpose is to transfer AC Electric to DC, converting high voltage to lower voltage, in order to power on LED LAMPS which were assembled by LED Chips. Most LED Lamps including LED Panel lights, led linear lights, LED Strips lights, led street lights, led wall pack, led shoebox light etc. How long does an LED driver last? 50,000 hours The average lifespan of an LED is often rated up to 50,000 hours. This is about 50 times longer than a typical incandescent, 20-25 times longer than a typical halogen and 8-10 times longer than a typical CFL. If used 12 hours a day, an LED rated at 50,000 hours will last more than 11 years.

Based on the Customers actual needs of the LED Driver, Fahold has been launching the new series 100-347Vac Input led driver, with Aux 12V output, for customers power their sensor which were set for their LED Lamps. with 2 different housing, different cost. Metal case is much cost effective.

The importance of LED lighting applications in the horticultural industry is increasing with the on-going trend of indoor and vertical farming applications. With controllable spectrum and illuminance, LED lighting is widely used in cultivation for various kinds of crops including tomatoes, cucumbers, herbs, greens and cannabis. LEDinside notices that many LED and lighting companies have increased their product portfolio for horticulture lighting and pushed related technology development. According to the report of LEDinside, titled [2019 Light LED and LED Lighting Market Outlook," horticulture lighting is growing fast with major market momentum from Europe. In addition, legalization of cannabis in some countries also pushes the sales of LED growing light for cannabis cultivation. Meanwhile, leading LED and lighting companies have set horticulture lighting applications as one of their business focuses. Signify has been actively expanding its products and technologies in the field. A report of Bloomberg indicated that Signify, as a strong player in the horticulture lighting market, is strengthening its position in the booming cannabis production. On the other hand, Osram had increased its investment in horticulture lighting with the acquisition of Fluence and stake purchase of Motorleaf. Despite its declining revenue impacted by automotive business, Osram stands firmly with plant lighting applications and developments. LED packagers also extend their products for horticulture applications. Samsung launched new horticultural lighting product series, including full-spectrum packages and modules. In addition, Samsung plans to integrate smart sensing or connected solutions to horticultural lighting LED products. LEDinside estimates that the market scale of horticulture lighting and LEDs will grow to US$ 633 Million and 151 Million by 2022, with a CAGR of 30% and 27% during 2018 to 2022 respectively.

Fahold G series LED high bay lights Driver unveil its unique Heat dissapation design to have long life span ability. One FAHOLD LED high bay light DRIVER can be used into at least three lighting space and you can adjust the current as you wish just by current button.Recently, the Output voltage of fahold LED high bay light driver can be interchanged to 25-40V,30-50V, 40-60V,50-82V etc. you can use them into different lamp board applications as you wish. 100W & 150W &240W G Series LED high bay light Driver: current changeable one fixture full 5 year warranty, what is current changeable mean? you are welcomed to inquire us for more to stefan@fahold.com www.fahold.com

From 9th June to 12th June, We Fahold as an Exhibitors attended to the Guangzhou international lighting fair. We used our experienced and professional service to accept every friends/customers from all over the world. This exhibition, we showed all the products we have like High bay lights Drivers, Shoebox Drivers, Linear light driver, Dali dimming Driver etc.. Also, We exhibited many unique new products: Adjustable output current linear driver with Dali dimming function. All in all, this lighting fair was full of success. The customers spoke highly of our products, and they all expressed that they would visit the factory after the exhibition to enhance mutual understanding and achieve more in-depth cooperation. We look forward to meet you again in next time and the Hong Kong Autumn Fair in October!

During 8-10th May, Many old&new customers had stopped by Fahold's booth in the LFI 2018, Chicago. Fahold has come to cooperation with serverl companies during the fair when we had a well conversation with them.

FAHOLD is showing at LIGHTFAIR® International (LFI®) how its [Passion for Lighting Power Source" and commitment to distribution make it the best retrofit partner of LED Driver for luminaires and lamps, and ultimately deliver quality FAHOLD BRAND luminaire and lamp Power supply, including smart lighting, for any purpose, commercial and residential. LFI, the world`s largest annual architectural and commercial lighting trade show and conference, takes place May 8 – 10, 2018 in Chicago. [In less than two years, FAHOLD has transformed from a manufacturer predominantly of traditional Small wattage Driver to an independent, dynamic and globally active lighting power source company with one of the most comprehensive LED Driver for general lighting," said Mr Liuyingyuan, Managing Director of FAHOLD. [One proof point is the fact that based on market research, we are on track to be one of the fastest growing suppliers of LED luminaires in North America. Our evolution is important because we intend to be the world number one in LED-based general lighting to benefit our customers." This year, FAHOLD has launched Series High power high voltage AC input led driver. At LFI, FAHOLD is highlighting some of these, in addition to providing a sneak peek to some future initiatives, including: How our distinctive SCALE Design by FAHOLD will be incorporated into future luminaires which will help customers immediately recognize our trusted quality, New additions to the industry-first Power Supply(Driver)+ Filament LED Lamp and Outdoor Lamps, How our approach to Human Centric Lighting provides lighting control tailored to individual users or small groups of users, particularly in small workrooms and offices, and The SYLVANIA SMART+™ Commercial Lighting portfolio in partnership with Leviton®, providing a perfect solution for upgrading any space easily with wireless controls to achieve energy and labor savings and a better occupant experience.

Heading toward the LightFair International event May 8–10 in Chicago, IL, a number of LED driver manufacturers have made news - including integration of features that support. In order to help more customers get benefits and enjoy the fahold good service&competitive price Drivers. A constant current LED dimmable driver from Fahold of China is 0-10V dimming 528V input standard and designed to be waterproof.This High voltage AC528V series has an output power of 40-240W and the output Voltage are 30-82V The driver is designed and tested that can be available for outdoor applications, such as street light, flood light, high bay light. It provides a 1% dimming depth. The dimming range is 1~100%. The driver adopts active PFC function. The power factor is above 0.95. The efficiency is 86%. At full load, the THD is less than 15%. There is short circuit, overload, over temperature protection.

FAHOLD just launched her second generation of high bay driver, FD-G series. It can be completely turned OFF even without cutting off the AC power. When the second generation of FD-G series works under a high voltage 480V environment, which was developed by FAHOLD R&D, the light turns on/off via dimmer, industrial application. The FD-G series is of IP65 for indoor application. The high efficiency up to 95% and low stand-by power less than 1 W help to improve the light efficacy and save energy. Super high efficiency and great thermolysis property expand the product lifetime. Meanwhile, the driver is with high power factor and low harmonic interference. In addition, all-round protection, including surge protection, over voltage protection, short circuit protection and over-temperature protection, greatly improve the product stability. The top of this product is equipped with a potentiometer which helps to adjust the output current/power of the product. The lighting fixture can be hung by a hanging ring or a bracket. Various installation options for the lighting fixture meet diverse needs. For additional information, please visit www.fahold.com or send an email to stefan@fahold.com About FAHOLD: Fahold is dedicated to design and manufacture exclusively for led constant current drivers. Fahold is our international brand and now recognized as the Faithful manufacturer and brand in the outdoor application driver`s industry. With 250 staff and 25 engineers, covering an area of 5,000 square meters and has production capacity of 200 thousands pieces per month. Now focusing on the 50-240 W constant current LED drivers mainly applied for LED Street&high Bay lights, LED down lights, LED tube lights, LED tri-proof lights, LED corn lights, LED high bays, etc. To maintain close contact with our customers, we have our sales channels for all major provinces and also abroad to guarantee prompt delivery and strong after-sales service. During all production process, the ISO9001:2015 quality control system is strictly followed. Our internal production pass rate is 99.6% and field failure rate after sales is 2000PPM. For more information, please visit our website at www.fahold.com

The Trump administration on April 4, 2018 published a list of 1300 Chinese exports and proposed to apply a 25% tariff on these products. However, the proposal would have limited impact on LED companies in China and Taiwan, according to LEDinside, a division of TrendForce. This is because the LED products included in the list are mainly intermediate goods, including wafers and backlight products. These products account for only a small proportion of all the LED products that China exports to the US market, while most of these intermediate goods produced by Taiwan LED companies are shipped to China. [Among all the products in the list, categories including 85414020, 85419000, and 90330020, etc. are related to the LED industry", says Figo Wang, senior analyst of LEDinside. China is a major producer of LED end-products and end-applications, but the three categories above are intermediate goods in the industry. The target market of these intermediate goods includes mainly manufacturers of LED end-products in China. The intermediate goods are not directly sold to individual consumers. Therefore, they only account for a small proportion of LED exports, and contribute to less than 5% of the revenue of LED industry. [There are only a few makers of LED end-products in the United States, which means even less intermediate goods would be directly exported to the United States", says Wang. LEDinside notes that, the HS code of LEDs made by China is 85414010. In this list, the category of 85414020 actually refers to solar cell products according to information provided by Chinese Customs. Therefore, the value of LED exports that may be subject to the tariff is only US$46 million in 2017. Even if the category of 85414010 is also included to the list, the value would be only US$129 million. The total value would be less than US$200 million, which would have only a very limited impact to China`s LED exports, of which the total value exceeds tens of billions US dollars. On the other hand, a large proportion of China`s LED exports to the U.S. are end-applications, such as lighting products in category 94540090 and 94051000, and display products in category 85312000, etc., but the above three categories are not included in the tariff list this time. In addition, as there are only a few US-based manufacturers of end LED applications, most products of branded lighting companies and sales channels are made in China. If these products are subject to the tariff in the future, the LED end-products sold in the U.S. market may face significant price rise.

Feb, 13th-15th. 2018. Fahold has whole new series High Voltage LED Driver for show on the Strategies in light, The LED Show in the past few days. During this show, many customers stop by Fahold's Booth and asking for the information of 300W constant voltage 24 led driver, and the linear led driver, as well as the UFO round High Bay Driver. As Nowadays the lighting industrial trends to be more and more smart system, Fahold launched out the smart dimming system led driver in order to meet up with the Lighting Market needs. The constant voltage 24V/12V Linear led driver with Dali dimming system are popular in the current market. Fahold has come to a cooperation with an United State Local Lighting company during the show. Focus on the High Voltage IP67 LED Drivers OEM. We Thanks for all the customers who supports Fahold products and stop by our Booth.

The 2018 Fahol Annual Conference were held on sunday 28 January from 6:30pm at the HuaYu Hotel Convention centre. The theme for this year`s conference is Making conclusion of 2017, set goal for 2018, welcome the dreams and many of the sessions will be developed around the themes of leadership, decision making and change management. Conference highlights include: GM speech: Express thankful thought to the employees, welcome fahold's raw material supplier to come. Dancing Show. Quality keynote speakers Inspirational Short Talks The event concluded the Annual Conference Dinner where the winners of the 2018 Fahold Awards for Excellence will be announced. This is the largest specialist Local Government conference in Shenzhen. Fahold GM Management Team Sing Dancing Show

WitsView, a division of TrendForce, reports that global LCD TV panel shipments increased quarter by quarter in 2017. 1H17 showed less momentum for holiday sales due to the high prices, but shipments rebounded in 2H17 as the prices declined and TV makers prepared for the year-end sales. Moreover, the new production capacities of BOE`s Gen 8.5 fab in Fuqing and HKC`s Gen 8.6 fab in Chongqing have been focusing on middle-size TV panels (43" and 32" respectively), bringing the annual shipments beyond expectation to 263.83 million pieces, an increase of 1.3% compared with 2016. As for 2018, Iris Hu, research manager of WitsView, points out that panel makers will continue to increase the production shares of large-size panels and UHD panels to boost the revenue and profit. [The penetration rate of UHD panels is expected to reach 42% this year, an increase of 7.4 percentage points compared with 2017", says Hu. Regarding the new production capacity, BOE`s Gen 10.5 fab produces mainly large-size TV panels (65" and 75"), but CEC`s two fabs still put their priorities at middle-size ones (32" and 50"). Meanwhile, replacement of CRT TV sets with 32" and 23.6" LCD ones is still ongoing in emerging markets, making the average panel size grow slower to 45.8 inches, only 1.3 inches up from 2017. Overall speaking, global TV panel shipments this year will have chance to hit a second-highest number in history, reaching 269.49 million pieces, an annual increase of 2.2%. LGD remains the leader in TV panel market while BOE took second place for the first time In the global TV panel shipment ranking for 2017, LG Display (LGD) came first place with a shipment of around 50.85 million pieces last year, a decrease of 3.9%. LGD expanded its production capacity in Guangzhou fab for 50K sheet, but in terms of panel size, increasing the production capacity share of 65" and greater panels has been the trend. Particularly, LGD shipments of 65" and 75" panels have increased significantly by 38.5% and 132.7% respectively, indicating that LGD has been making efforts to retain its market share in large-size TV panel sector before BOE`s Gen 10.5 fab enter mass production. BOE deliberately slowed down its 32" TV panel production growth in 2017, so the shipments of this size increased by only 0.4%, totaling 43.81 million pieces. But its total shipments climbed to second place for the first time as Samsung Display (SDC)`s closure of L7-1 fab influenced its production. As BOE`s Gen 8.5 fab in Fuqing entered mass production in 2Q17, BOE`s shipments of 43" TV panels grew remarkably by 247.6% last year. Innolux`s Gen 8.6 fab entered mass production in early 2017, but the yield rate and output were less than expectation in the first half of 2017. In the second half, high pricing of panels led to shrinking demand, resulting in Innolux`s slow-moving and excess stocks. In addition, Innolux announced to enter the TV assembly market, which made its clients more conservative in making orders. Fortunately Innolux figured out the solutions of pricing and stock problems, and ended up with shipments of 41.8 million pieces, an increase of 0.2%, ranking the third. SDC dropped out of top 3 due to closure of L7-1 fab, CSOT recorded the highest growth by shipment area SDC`s shipments saw a substantial decline of 15.4% last year since the closure of its L7-1 fab. Its overall TV panel shipments turned out to be 39.6 million pieces, the highest decline among the six major panel makers. Although its shipments have dropped out of top 3, SDC has improved capacity utilization by simplifying its product mix, and has invested in production equipment of UHD and large-size panels to increase the value of its products. As for product portfolio, SDC took initiatives to develop UHD panels, whose proportion came to 54.6% among all of SDC`s products, and also remained a major supplier of large-size panels (55", 65" and 75"). Particularly, its market share of 65" sector was as high as 36.3%, showing definite advantages over its competitors. China Star Optoelectronics Technology (CSOT) kept increasing the shipments after the capacity of the second phase of its second Gen 8.5 fab was expanded to 140K sheet. CSOT`s final shipments recorded 38.64 million pieces, an increase of 16.8% compared with the previous year. Particularly, 55" panels recorded a 19.4% shipment growth, as CSOT`s capacity expansion came mainly from this size. As for the growth by shipment area, CSOT recorded a 19.6% YoY increase, the highest among the six major panel makers. TV panel shipments for AU Optronics (AUO) in 2017 came to around 27.21 million pieces, 0.1% down from the previous year. AUO continued to optimize its product portfolio and increased the proportion of large-size panels, so it finally recorded a 5.1% growth of shipment area. In addition, AUO also put focus on increasing the proportion of UHD products, reaching 44% of all its products, the third highest number following LGD and SDC.

Under the technological progress, the electric lights are gradually replaced by the power saving LED lights to cope with the shortage of energy shortage, but in fact the LED lights can be more refined through the second energy saving program to maximize the power efficiency. After many years of efforts, Fahold team has developed and integrated all products, Designing smart energy-saving dimming Power supply, the secondary energy-saving applications in all products, LED dimming is currently the most effective secondary energy solutions, but due to technical problems and costs, it causes LED dimming has not yet effectively popularized, Fahold has a breakthrough program, the LED can effectively develop the secondary energy saving and cost control, so that LED popularization, the use of panel light dimming LED second energy saving, can be used in 24-hour energy saving, human perception / Daylight utilization / APP dimming control. Panel light sources can be used in clean rooms and development of anti-exposure products and dimmable. Global warming has intensified in recent years has become an important environmental issues, Fahold in order to make an effort on behalf of the Earth, accelerating the second energy-saving dimmer lamp Power supply, greatly enhance the environmental benefits of energy saving. Fahold is confident to provide customers with R & D, manufacturing and customized services in the "Second Energy-saving Dimming System Project" and to open up the international market to become the world leader in smart lighting through product-to-country exchange.

As Fahold has got more and more Market Share in North America Market, in the second half of 2017, Fahold got more and more Waterproof Led Driver orders from North Amrica Market customers, which requires us introducing in more equipments to increasing the production and shorten the lead time, today we formally introduces in 10 more LED Driver burn-in system machine.

After one year hard working, Fahold has been Achiieving a great progress in Designing new types led drivers (LED Street Light Driver, Canopy light driver.) and fahold's total shipment volumes reached 2,400,000pcs led drivers. We Thanks for every staff's effort, on 30th,Dec. we held a party for the staff whose birthday were in December. Thanks for their had working and in this moment we looking to the coming 2018, we believe we will earn a better business!